Using The Pop-Up Flash - HP Photosmart 850 User Manual

Using the pop-up flash

NOTE
You cannot use the flash while recording video clips.
The flash on your camera is turned
off and the flash will not fire until
you manually pop it up by sliding
the pop-up flash
the camera. When the flash is
popped-up, it begins to charge
and is automatically set to the
flash setting.
To change the flash setting, press
the Flash button on the back of
the camera until the desired setting
appears on the active display.
The following table describes the
different flash settings.
NOTE
If you change the flash setting, the camera will remain
in that setting until you change it or turn off the camera.
Icon Setting
Auto
A
Auto with
A
Red-eye
Reduction
Chapter 2: Taking pictures and recording video clips
release on top of
Auto
Description
The camera measures light and uses the
flash if necessary.
The camera measures light and uses the
flash with red-eye reduction if necessary.
29