Setting The Flash - HP photosmart 930 series User Manual

When you have not changed
Exposure Compensation
2 seconds, the meter disappears,
but the value remains at the bottom
of the screen flanked by arrows
(unless it has been set to 0).
Exposure Compensation
the default 0 (zero) setting when you
turn the camera off.

Setting the flash

NOTE
The flash does not work while recording video clips.
The Flash button lets you toggle
between the four flash settings
on the camera.
default flash setting. The flash
setting resets to
turn the camera off.
To change the flash setting,
press the Flash
Off , Flash On
Auto flash setting is selected when none of the three
A
flash lights is lit. The following table describes the different
flash settings.
Chapter 2: Taking pictures and recording video clips
for
resets to
Auto is the
A
Auto when you
button on the top of the camera until the Flash
, or Night flash light is lit. The default
33