Address Resolution Protocol (Arp) Commands - Intel Express 10 User Manual

C H A P T E R
CAUTION
The com-
del-lt-entry
mand is very powerful,
allowing you to change the
entire switching database
with the exception of the
system MAC addresses. Use
it with caution.
3 Console Command Reference
Address Resolution Protocol (ARP)
Commands
get-arp-tbl
Displays the ARP table. The table lists the port and MAC address for
each IP address the switch has communicated with recently.
SYS_console> get-arp-tbl
IfIndex IpAddress
====================================================
1 129.001.001.001
1 129.001.001.200
add-arp-entry
add-arp-entry <IPaddress> <mac_address> <port>
Adds an entry to the ARP table manually.
device is connected to.
del-arp-entry
del-arp-entry {<IPaddress>|*}
Deletes entries from the ARP table. If you enter an IP address, the
matching ARP entry is deleted. If you enter
cleared.
Use this command if the network topology physically changes. For
example, when a management station moves from one segment to
another and its port number changes.
MAC Address
00-40-05-2D-73-9C
00-02-A0-D4-9A-57
is the switch port the
port
, the entire ARP table is
*
47