Intel Express 10 User Manual page 28

C H A P T E R
24
2 Intel Express 10/100 Fast Ethernet Switch
2 Create the two SVLANs. Type the commands:
set-sec-vlan all 3-5-7
set-sec-vlan all 1-2-3-4-6-7-8
These commands create two SVLANs and saves the entries in
NVRAM. Replace
changing it immediately or with
without saving it.
3 To display a summary of saved SVLANs, type:
get-svlan-tbl nvram
Any SVLANs created with the
To create a VBD
1 Determine the ports you want to group together.
The Engineering workgroup on port 8 experiences a high volume
of traffic just within its own workgroup. Broadcast traffic from
other workgroups adds to the problem. By grouping port 8 and
port 6 into a VBD, the Engineering workgroup can access the
common application server on port 6 while being shielded from
the rest of the network's broadcast traffic.
However, this configuration prevents ports 1-4 and 7 from seeing
the application server. Another VBD that includes ports 1-4 and
6-7 will allow other ports to reach the file server.
2 Type the commands:
set-vbc-domain run 6-8
set-vbc-domain run 1-2-3-4-6-7
These VBDs are temporary (only until the next reset or power
down). To save the entries for future use and have them take
effect now, replace
3 To display a summary of saved VBDs, type:
get-vbc-tbl nvram
with to save the entry without
all nvram
to change the entry now
run
or
nvram all
with .
run all
options are displayed.