Intel Express 10 User Manual page 30

C H A P T E R
26
2 Intel Express 10/100 Fast Ethernet Switch
To check traffic on a port
1 Determine the port you want to check.
2 Type the command. For example:
SYS_console> get-br-cnt 3
Ethernet Switching Counters for port 3
====================================================
Frm Received OK :
Bytes Received
Frm Filtered
Frm to all ports
Frm multicast
Frm lost/fctrl
Transmit OK
Forward to port
-----------------------------------------------------
1
2
3
4
5
6
7
====================================================
In this example, a station on port 3 is accessing a server on port 4.
To reduce the amount of traffic crossing the switch, connect the
server to a hub on port 3 instead of a hub on port 4. This keeps
traffic localized to the same segment.
3 Repeat steps 1 and 2 for each port on the switch and for each
command listed on the previous page.
1419681
: 842637991
: 0
: 0
: 16017
: 0
: 1404387
: FRAMES
: 0
: 0
: 218103808
: 1419823 842711315
: 0
: 0
: 0
BYTES
0
0
60
0
0
0