Vlan Commands - Intel Express 10 User Manual

C H A P T E R
56
3 Intel Express 10/100 Fast Ethernet Switch
del-cf-entry
del-cf-entry {run|nvram} <mac_address> <sport>
Deletes the custom filter entry for address
port Ports are deleted one at a time by entering the port
sport.
number. Select
run
table only. Select
nvram
well as the currently running table.
get-nv-cftbl
Displays the custom filter table stored in NVRAM.
NVRAM CUSTOM FILTERS TABLE
==============================
Entry ---- MAC Address ----
------------------------------
1 00-00-00-11-11-11
get-nv-cfilt
get-nv-cfilt <mac_address>
Displays the custom filter associated with
custom filter table stored in NVRAM.

VLAN Commands

Use VLANs to limit the broadcast domain and establish security
virtual LANs. For procedural information on VLANs, see page 23.
• indicates that only the currently running configuration is
run
changed. A reset doesn't restore the changes.
• indicates that only the configuration stored in NVRAM is
nvram
changed. Changes don't take effect until a reset.
• indicates that both the currently running configuration and the
all
NVRAM configuration is changed. Changes take effect
immediately and are restored after a reset.
mac_address
to delete the entry from the currently running
to remove the entry from the NVRAM as
mac_address
from source
from the