Creating A Dhcp Scope For The Ip Telephones - Avaya 4600 Series Administrator's Manual

Server Administration

Creating a DHCP Scope for the IP Telephones

Use the following procedure to create a DHCP scope for the IP telephones.
1. Select Start-->Programs-->Admin Tools-->DHCP Manager.
2. Expand Local Machine in the DHCP Servers window by double clicking it until the + sign
changes to a - sign.
3. Select Scope-->Create.
4. Define the range of IP Addresses used by the IP telephones listed in
Network Information Before Installation - Per DHCP
The Start Address is the first IP Address to be used for the IP telephones.
The End Address is the last IP Address to be used for the IP telephones.
Set the Subnet Mask to the value recorded in
Before Installation - Per DHCP
To exclude any IP Addresses you do not want assigned to IP telephones within the Start
and End Addresses range:
a. In the Exclusion Range Start Address field, enter the first IP Address in the range that
you want to exclude.
b. In the Exclusion Range End Address field, enter the last IP Address in the range that
you want to exclude.
c. Click the Add button.
d. Repeat steps a. through c. for each IP Address range to be excluded.
Example:
Suppose the range of IP Addresses available for your IP telephone network are:
135.254.76.7 to 135.254.76.80
●
135.254.76.90 to 135.254.76.200
●
135.254.76.225 to 135.254.76.230
●
Your start address and end address are 135.254.76.7 and 135.254.76.230
respectively.
Exclude the ranges 135.254.76.81 to 135.254.76.89 and 135.254.76.201 to
135.254.76.224.
Note:
We recommend that you provision the 4600 Series IP Telephones with
Note:
sequential IP Addresses.
We recommend not mixing 4600 Series IP Telephones and PCs in the
same scope.
64 4600 Series IP Telephone LAN Administrator Guide
Server.
Table 3: Required Network Information
Server.
Table 3: Required