Transferring Results To A Computer - Bayer HealthCare Contour Next EZ User Manual

Using the Reminder Feature
You can now run another test by placing a test strip in
the test strip port and following the testing instructions
(page 8).
If you do not want to mark this test, remove the test
strip to turn the meter off. Dispose of the used test strip
as medical waste.
If you decide not to test after the reminder sounds,
press any button to turn your meter off.
The meter will only set one reminder at a time. It will
remember the last reminder set.
®
32
When the reminder sounds,
the meter will automatically
turn on. The reminder will
beep 20 times, and the
display will show the pre-
meal test result you marked
when you set the reminder.
Pressing any button will
silence the reminder.
When you have completed
this test and the result is
shown on the display, will
flash. To mark this test as a
post-meal result, press M.
To Cancel a Reminder
When the meter is off, press
M to turn on the meter. The
date and time will appear
along with the
Press ▲ or ▼ twice and the
reminder icon will disappear.
Press M to cancel the
reminder.

Transferring Results to a Computer

You can transfer test results from the
C ® N EZ meter to a computer, where
ONTOUR EXT
they can be summarized in a report with graphs
and tables. To make use of this feature, you need
G ® D diabetes management software
LUCOFACTS ELUXE
from Bayer and a data cable. For a free download
of the software go to www.bayerglucofacts.com.
For more information, call Bayer Diabetes Care Helpline
at 1-800-268-7200.
IMPORTANT: The C
ONTOUR
not been tested by Bayer for use with any software
other than diabetes management software from
Bayer. Bayer is not responsible for any erroneous
results from the use of other software.
Need Help? 1-800-268-7200
www.diabetes.bayer.ca
.
N EZ meter has
EXT
33