The Clock - Rangemaster Professional+ 100 FX Dual Fuel User's Manual & Installation Instructions

Professional+ 100 fx dual fuel
Table of Contents

Advertisement

Fig.2-15
ArtNo.270-0026
Proplus MF oven controls (2)
Fig.2-16
ArtNo.300-0004 2-button clock annotated
A
A – Timer knob, B – Adjusting knob
Fig.2-17
ArtNo.300-0005 2BC
minute minder setting
Fig.2-18
ArtNo.300-0006 2BC
minute minder setting 2
Fig.2-19
ArtNo.301-0007 2BC
Stopping the oven 1
Fig.2-20
ArtNo.301-0008 2BC
Stopping the oven 2
Operating the Ovens
Turn the oven knob to the desired temperature (Fig.2-15).
The oven indicator light will glow until the oven has reached
the temperature selected (Fig.2-15). It will then cycle on and
o during cooking.

The Clock

You can use the clock to turn the left-hand oven on and o .
The clock must be set to the time of day before the oven
will work.
Setting the Time of Day
The 2-button LCD clock is shown in (Fig.2-16). When the
clock is rst connected, the display ashes ( 0.00 ) and (
alternately.
To set the time, turn and hold the Timer knob to the clock
symbol [
or right until the clock shows the time of day. Remember this
is a 24-hour clock. Let go of the Timer knob and it will spring
back to the vertical, oven manual setting.
IMPORTANT: The left-hand oven will not operate unless the
clock has been set.
Setting the Minute Minder
B
To activate the minute minder turn the Timer knob to the
right to the [
position (Fig.2-17).
Rotate the Adjusting knob to set the time required (Fig.2-18).
You can either turn the knob back to the vertical manual
setting [
the [
To stop the beeper when it sounds, turn the Adjusting knob
counter-clockwise.
To Stop the Oven at a Specific Time of Day
Turn the Timer knob to the [
Use the Adjusting knob to set the 'stop time'. You can set
the oven to turn on at any time over the following 24-hour
period. AUTO shows in the display (Fig.2-20).
Turn the Timer knob to the bottom 'AUTO' setting to return to
the clock display.
Once the 'stop time' is reached, the beeper sounds. Turn the
Timer knob to the vertical [
To Start and Then Stop the Oven Using the
Timer
You cannot set a start time directly – this is set
automatically by a combination of the 'cook time' and
'stop time'.
8
] and at the same time turn the Adjusting knob left
] minute minder setting – it should click into
] to keep an eye on the time of day, or leave it in
] minute minder position as the time ticks down.
The 'cook period', which is the length of time you
want the oven to cook for.
The 'stop time', which is the time of day you
want the oven to stop cooking.
] position (Fig.2-19).
] to return to manual cooking.
)

Advertisement

Table of Contents
loading

Table of Contents