TRENDnet TV-IP662PI User Manual page 47

Megapixel poe day/night ptz network camera

Hide thumbs Also See for TV-IP662PI:

Table of Contents

TRENDnet User's Guide

5. Go to Virtual Server* section and create a new entry.

Enable: Click Enable

Name: Enter the application name (eg. CameraName)

Protocol: Select TCP

Private Port: The HTTP port that you assign on your Camera.

Public Port: The port used on remote side to access to your Camera.

LAN Server: The local IP address of your Camera.

Then click Add to add the application.

* Please refer to your router's user's manual for detail Virtual Server setting.

Some router might use Port Forwarding or Special applications for this

function. The setup steps should be very similar.

6. Open another web browser and enter your DDNS domain and camera's port

number.

http://yourDomainName:PortNumber

7. Camera's login page will appear.

Configure DDNS on your router

1. Go to Camera's NetWork  Ports Settings section, assign a HTTP port for your

camera and click Apply.

2. Login to your router's web configuration page.

Find the Dynamic DNS configuration section.

TV-IP662PI

Table of Contents