TRENDnet TV-IP662PI User Manual page 38

TRENDnet User's Guide
Selecting Motion, will tell the camera only to take snapshots when motion is detected.
Tick the Schedule option to only take snapshots for motion at specific times of the
week. Tick the Day and enter the Start and End times.
After selecting the Schedule option as the Trigger by event, the following can be
configured.
Selecting Schedule, will tell the camera to always take snapshots within the scope of the
schedule configured. Tick the Day and enter the Start and End times.
After selecting the Always option as the Trigger by event, the following can be
configured.
Selecting Always, will tell the camera to always take snapshots.
After selecting the Sound option as the Trigger by event, the following can be
configured.
Selecting Sound, will tell the camera only to take snapshots when sound is detected.
Tick the Schedule option to only take snapshots when sound is detected at specific
times of the week. Tick the Day and enter the Start and End times.
© Copyright 2014 TRENDnet. All Rights Reserved.
In the Snapshot Type section, we can configure the following.
Only Profile 3 can be used to take snapshots.
In the Target section, we can configure the following.
In this section we can configure where the snapshot will be saved. Select FTP or E-mail
as the target.
TV-IP662PI
37