TRENDnet TV-IP662PI User Manual page 33

TRENDnet User's Guide
After selecting the Sound option as the Trigger by event, the following can be
configured.
Selecting Sound, will tell the camera only to record when sound is detected. Tick the
Schedule option to only record video when sound is detected at specific times of the
week. Tick the Day and enter the Start and End times.
In the Recording Type section, we can configure the following.
Enter the Pre-event recording and Post-event recording time values in the respective
fields provided.
When selecting the Snapshot option, the following can be configured.
Selecting this option will tell the camera to only take a snapshot (an image capture) of
the video feed when the abovementioned criteria are met. Enter the Interval value in
the space provided. The interval value means that a snapshot will be taken at every
interval configured. Only Profile 3 can be used for this selection.
© Copyright 2014 TRENDnet. All Rights Reserved.
When selecting the Video option, the following can be configured.
Selecting this option will tell the camera to record a video clip when the
abovementioned criteria are met. Select the video profile (Source) that will be used for
the recording. Select the File Format that the recording will be saved as. File formats
available are AVI and MP4. Select the Recording clip time value between 1 and 6
minutes. This will split the total recording into smaller separate files for the duration of
the recording.
In the Target section, we can configure the following.
After selecting Micro SD Card as the recording Target, the recording will be saved on the
micro SD card installed in the camera. Enter the Keep Free Space value that is needed
on the micro SD card. Tick the Recycle option to record until the space is filled on the
micro SD card and then to record over the oldest recordings found on the card.
TV-IP662PI
32