Network - TRENDnet TV-IP662PI User Manual

TRENDnet User's Guide
In the Automatic Time Configuration section, we can configure the following.
Tick the Synchronize with Network Time Protocol server option to enable the
automatic time configuration option. Enter the NTP Server address of the time server
used here or select the Set NTP Server from DHCP option to allow the camera to obtain
the date and time settings from the NTP Server that is configured to run in collaboration
with the DHCP server on your local network.
In the Set Date and Time Manually section, we can configure the following.
Tick the Setup Date and Time Manually option to manually configure the date and time
settings for this camera. Select the Year, Month, Day, Hour, Minute, and Second
options from the drop-down menus provided to manually configure the date and time
settings used by the camera. Alternatively, click the Sync with Computer Time button to
automatically configure the camera's date and time settings to be the same as the
current date and time settings on the local computer. Click the Apply button to apply
the modifications made.
© Copyright 2014 TRENDnet. All Rights Reserved.

Network

The next category option available is Network. In the Network category we can
configure the wired network settings. Also available for configuration in this category is
Dynamic DNS.
TV-IP662PI
25