System; Firmware Update - TRENDnet TV-IP662PI User Manual

TRENDnet User's Guide

System

In the System section we can configure the following.
Click the Backup button to back up the camera configuration file that will be saved on
the local computer. When you backup the configure file, a dialog box will pop
up. Enter a key. This will password-protect the configuration file. You will need to
enter the same key when you restore the configure file to the camera.
Click the Choose File button to navigate to the backed up configuration file on the local
computer and then click the Restore button to restore the configuration file. You will
need to enter the same key that typed in when you backed up the configuration file.
Click the Reset button to restore the camera to its factory default settings. Note: All
configurations that were done on this camera will be lost and the camera will return to
its factory default configuration.
Click the Reboot button to simply reboot the camera.
© Copyright 2014 TRENDnet. All Rights Reserved.

Firmware Update

In the Firmware section we can view and configure the following.
In the Firmware Information section, information regarding the current running
firmware version will be displayed.
In the Firmware Upgrade section, click the Choose File button to navigate to the saved
firmware file, located on the local computer, and then click the Upload button to upload
that firmware to the camera. The camera will then use this firmware file to upgrade the
firmware of the camera.
Note: To find the latest firmware available for this camera, visit the TRENDnet website.
TV-IP662PI
42