TRENDnet User's Guide
How to setup/access the camera remotely
The Dynamic DNS connection can be configured on the camera itself or the home
router. An account from any of the listed Dynamic DNS providers is required prior to this
operation.
Configure Dynamic DNS on your Camera
1. Go to camera's Dynamic DNS page. Tick Enable to activate the feature. Then
select a Dynamic DNS provider from the list. After selecting the Dynamic DNS
provider, the domain name will be entered into the Server Address field.
2. Enter Dynamic DNS' Host Name, User Name and Password. Re-enter the
password to confirm it.
© Copyright 2014 TRENDnet. All Rights Reserved.
3. In the Port Number section, assign an HTTP port of the camera. The default
HTTP Port on the camera is 80. The example shows above is using port number
9000.
4. Open the router's Web configuration page.
(In the example, TRENDnet's TEW-651BR Wireless N Home Router is used)
TV-IP662PI
45