TRENDnet TV-IP612P User Manual
  1. Manuals
  2. Brands
  3. TRENDnet Manuals
  4. Security Camera
  5. TV-IP612P
  6. User manual

TRENDnet TV-IP612P User Manual

Hide thumbs Also See for TV-IP612P:
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading

Related Manuals for TRENDnet TV-IP612P

Summary of Contents for TRENDnet TV-IP612P

  • Page 2: Table Of Contents

    CONTENTS ABOUT THIS USER’S GUIDE ...................... 1   INTRODUCTION ........................... 2   Features and Benefits  .......................... 2  Unpacking the Package .......................... 3  System Requirements .......................... 4  Default Settings ............................ 5  Camera Hardware Components ........................  6   Front Panel Components  .......................... 6  LED Indicators  ............................. 6  Rear Panel Components .......................... 7  INSTALLING THE CAMERA ...................... 9   Attach the Metal Plate .......................... 9  Connect Ethernet Cable ........................... 10  Connect Power and Power On Camera  .................... 10  Reset Camera ............................ 11  SECURITY ............................  1 2   APPLICATION ..........................  1 3   USING THE UTILITY ........................  1 4  ...
  • Page 3 Video Audio ............................ 41  Video and Audio  ............................ 41  Video Profile 1‐4  ............................ 41  Audio Setup .............................. 42  Image Setup .............................. 42  ICR ................................ 44  Action .............................. 45  Recording .............................. 45  Recording Options ............................ 46  Scheduling .............................. 46  Snapshot .............................. 47  Email Settings ............................ 47  Preset Position ............................. 48  Camera Control ............................ 48  Digital Output  ............................... 49  External Digital Input/Output Connectors .................... 49  Trigger .............................. 50  Trigger Event ............................ 50  Motion Detection ........................... 51  Live Video  .............................. 51  Drawing Mode:  ............................ 51  Tools  ............................... 52  Backup and Restore ............................. 52  Firmware Upgrade ............................ 52  Device Info  .............................. 53  Device Info .............................. 53  Log ...
  • Page 4 A. Frequently Asked Questions ....................... 80  B. PING your IP Address .......................... 82  C. Troubleshooting  .......................... 84  D. Time Zone Table .......................... 89  E.Technical Specifications ........................ 92 ...

  • Page 5: About This User's Guide

    TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera About This User’s Guide This User Guide provides instructions on how to install the TV-IP612P/W Wireless Network camera and use it for camera monitoring applications. Camera monitor applications are accessible through an Ethernet or 802.11b/g/n wireless local area network. The following chapters are included in this User Guide: •...

  • Page 6: Introduction

    Windows XP/Vista/7. Moreover, it can be integrated easily into other www/ Intranet applications. Video Encoding The TV-IP612P/TV-IP612WN provides you with selectable video encoding formats that are able to efficiently utlize bandwidth. Using selectable video compression such as MJPEG, MPEG-4 and H.264 codecs, a reduction in bandwidth and storage space can be achieved.

  • Page 7: Unpacking The Package

    3G protocols. Local A/V Output The TV-IP612P/TV-IP612WN is equiiped with a A/V output which allows you to connect it directly to a TV or VCR to view or record the camera’s video. The Audio from the A/V output jack can be connected directly to a local speaker inorder to provide audio to anyone within hearing range of the camera.

  • Page 8: System Requirements

    TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera System Requirements Networking • Local Area Network: 10Base-T Ethernet or 100Base-TX Fast Ethernet • Wireless Local Area Network: IEEE 802.11b/g/n Wireless LAN (TV-IP612WN only) Computer • CPU: P4 2.8GHz or above • Memory: 512 MB or above •...

  • Page 9: Default Settings

    TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera Default Settings Use the default settings to access the web-based management software and live video display. Default configuration settings Username This is the Username you will be prompted to enter when you access the TV- IP612P/WN configuration screens using a Web browser.

  • Page 10: Camera Hardware Components

    TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera Camera Hardware Components This section provides information about the Camera’s hardware components: Front Panel Components Camera lense Link LED indicator Power LED indicator Microphone Front panel of TV-IP612P/W LED Indicators This LED indicator lights steady orange when a valid Ethernet link is established.

  • Page 11: Rear Panel Components

    TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera Rear Panel Components The power connection to the camera when fitted with the Infrared lens is split between the camera body and lens using the power connection adapter cable attached to the infrared lens. All other cables connect to the camera at the rear panel.
  • Page 12 TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera Used this jack to connect and record audio from an external microphone. Use to reset device to factory default settings including IP address and Reset Button administrator user name and password. A threaded post is used for attaching the antenna. Fasten the antenna Antennas securely to the post.

  • Page 13: Installing The Camera

    TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera Installing the Camera The camera is intended for indoor use. The camera, the power adapter and power source should be protected from water and moisture, excessive heat, direct sunlight and cold. Make sure the power adapter and its cord and the Ethernet cable are safely arranged so they do not create a tripping hazard and will not be disturbed by people or objects moving past.

  • Page 14: Connect Ethernet Cable

    TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera Connect Ethernet Cable To connect the camera to your network, connect a Category 5 or better Ethernet cable to the network cable connector located on the camera’s left side panel, and then attach it to the network. The Ethernet port will automatically detect and adjust to the speed (10 or 100 Mbps) and polarity (MDI-II or MDI-X) of the connection.

  • Page 15: Reset Camera

    If using the TV-IP612WN Wireless Camera, the default SSID is “TRENDNet”. The administrator’s default user name is admin and the password is admin. Use the Setup Wizard shipped with the camera to reconfigure it or access it through the web-based...

  • Page 16: Security

    TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera Security To ensure the highest level of security and prevent unauthorized usage of the Camera, the Administrator account has exclusive access to the camera’s configuration settings. The Administrator account can create up to 20 users. A User only has access to the Live View portion of the browser software to view and record video.

  • Page 17: Application

    TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera Application The TV-IP612P / TV-IP612WN camera can be applied in a wide range of applications, including: • Monitoring of local and remote places and objects, such as construction sites, hospitals, amusement parks, schools and day-care centers by using a web browser.

  • Page 18: Using The Utility

    TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera Using the Utility This chapter describes the software utilities for the IP Camera, including how to set up your Camera with the utility. The SetupWizard has a user-friendly interface that allows you to setup the Camera easily.
  • Page 19 TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera 2. The next window asks you whether you want to accept the License Agreement or not. • If you agree with the Licensing Agreement, click the I Agree radio button and the Next >...
  • Page 20 TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera 5. The software will start to install. The following window appears, showing the progress of the installation: 6. When installation is complete the following window appears to confirm that the SetupWizard has installed successfully: •...
  • Page 21 Launching the SetupWizard To launch the SetupWizard, click the SetupWizard icon on your desktop or go to Start > Programs > TRENDnet > SetupWizard > SetupWizard to start the appilcation. SetupWizard- Install Your Camera Connect the camera to your LAN using the provided RJ45 cable.
  • Page 22 TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera SetupWizard- Select Your Camera The following screen appears showing the cameras that have been found on your network: Click on the camera you want to configure. Click Next to continue.
  • Page 23 TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera SetupWizard- Authentication On the following screen type in the ID and Password that you will use to configuring the camera settings: Type a User ID in the ID field. Type a password for the User in the Password field.
  • Page 24 TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera SetupWizard- Other Settings The screen below allows you to set the camera name and the camera’s time settings. Type a name to help you identify the camera in the Camera Name field. Set the camera date and time from the Camera Time drop-down menus. To use the time settings from your computer, click the Copy Local Time button.
  • Page 25 TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera SetupWizard- Change Password The following screen allows you to change the default admin password: Carry out the following if you want to change the admin password: Tick the Change Password checkbox Type in a New Password in the New Password field and confirm it in the Confirm...
  • Page 26 TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera SetupWizard- Select a Connection Option The following window allows you to specify the connection method used by your camera network. Click the radio button of the network environment your camera is connected to. The available...
  • Page 27 TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera SetupWizard – Select a Connection Option - PPPoE If your connection method is PPPoE, click the PPPoE radio button and click Next: The following window appears: Type the User Name used to connect to your PPPoE connection in the User Name field.
  • Page 28 TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera SetupWizard- Select a Connection Option- DHCP If your connection method is DHCP, click the DHCP radio button and click Next:...
  • Page 29 TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera SetupWizard- Select a Connection Option- Fixed IP If your connection method is Fixed IP, click the Fixed IP radio button: The following window appears: Type in the IP Address, Subnet Mask, Default Gateway, Primary DNS Server IP address and Secondary DNS Server IP Address in the appropriate fields.
  • Page 30 TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera SetupWizard- Setup Wireless (For TV-IP612WN only) After choosing your connection method, the following window appears: Choose if you want to connect to your camera using the wireless connection or not by clicking the appropriate radio button.
  • Page 31 TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera SetupWizard- Setup Wireless (For TV-IP612WN only) If you selected the option to use a wireless connection to connect to your camera the following window appears: Choose the Access Point you want to connect the camera to from the Available AP drop- down menu.
  • Page 32 TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera SetupWizard- Setting Up The Camera The following window appears, summarizing the network settings of your camera: When you have finished setting up the Camera click the Next button. To make any changes to your Camera settings, click the Previous button.
  • Page 33 TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera SetupWizard- Complete After the camera has restarted, the following window will appear: Click the hyper-link to connect to the camera web interface. If you want to setup an additional camera, click the Setup Another Camera button.

  • Page 34: Using The Camera Web Manager

    For the initial setup, use the Setup Wizard program located on the TV-IP612P/WN CD-ROM included with the camera. Use the IPCam Wizard to assign an IP address and other network settings.

  • Page 35: Login

    TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera Login To access the web manager directly from a computer or on a network without a DHCP server running, use the default IP address of the camera in the browser address entry to access the web manager.

  • Page 36: Wizard

    TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera Wizard The first menu to appear after clicking on Setup is the the automatic setup wizard. You can use this wizard to configure settings for your camera’s Name, LAN and Internet, DDNS and Time/Date.

  • Page 37: Step 1 Setup Lan Settings

    TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera Step 1 Setup LAN Settings Select the DHCP Connection option if your wired or wireless connection will use a dynamically assigned IP address Select the Static IP Address option and then manual enter in the network settings your camera will use.

  • Page 38: Step 3 Setup Ddns Settings

    TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera Step 3 Setup DDNS Settings To synchronize the public IP address of the Modem, when it has been modified, use the DDNS service settings. You must supply the Username and Password when utilizing the DDNS service.

  • Page 39: Step 5 Setup Time Zone

    TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera Step 5 Setup Time Zone Use this step to configure the Time and Date, the Time Zone and the Daylight savings configuration of the camera. Time Zone: Select the Time Zone for your camera in the drop-down list.

  • Page 40: System

    TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera System The system menu item configures the devices users, associated passwords, device name, OSD settings, and LED light control. Device Management Admin Password Settings: Use the fields to change the administrator password used to access the System Administration settings.

  • Page 41: Time And Date

    TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera Time and Date Time Configuration Time Zone: Select the Time Zone for your camera in the drop-down list. Enable Daylight Saving: Select this to enable Daylight Savings for the Time Zone you have chosen above. This will automatically set daylight savings time depending on the date and time for each time zone.

  • Page 42: Network

    TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera Network Use the menu selections in this section to configure the network settings for both wired and wireless LAN setups (TV-IP612WN only) of the camera. Network Setup DHCP Connection: Select this option to automatically configure the Camera IP settings from a DHCP server.

  • Page 43: Port Settings

    TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera Port Settings HTTP Port: Configure this with the HTTP Port to be used for viewing the camera over the internet. RTSP Port: Configure this with the Real Time Streaming Protocol port used by an RTSP client to view the camera from for example, a mobile or smart phone.

  • Page 44: Selecting A Ssid From The Site Survey

    TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera Selecting a SSID from the Site Survey When you click on the Scan button in the Wireless menu a list of networks is available in the pull- down list immediately below. Selecting one of these items automatically populates the Wireless Mode, Channel, Authentication and Encryption fields.

  • Page 45: Video Audio

    TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera Video Audio Video and Audio Video Profile 1-4 Encode Type: Select one of H264, JPEG, or MPEG4 encoding from the drop-down menu. Profile 4 is always set to MPEG4. Resolution: Select the size of the desired screen viewing resolution .

  • Page 46: Audio Setup

    TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera Audio Setup Enable Speaker: Check this box to enable the local external speaker on the camera. Using the microphone on your computer allows you to speak to anyone near the camera. Volume: Adjusts the volume of the external speaker turned on above.
  • Page 47 TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera Advance Image Settings Auto Gain Control: When the level of input luminance is too dark, setting the AGC to high will automatically increase the image brightness. Back Light Compensation: When the background of the input image is too bright, use the BLC function to make the objects in the image clearer.

  • Page 48: Icr

    TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera Shutter Mode (Shutter-preferred) • Select Auto to have the camera shutter-speed be automatically set. • Select Manual to adjust the shutter-speed of the camera using the Shutter Value settings in the below pull-down menu •...

  • Page 49: Action

    Server: Use this field to input the Samba drive URL or IP address. Shared Folder: Input the name of the shared folder to use. (eg. TV-IP612P) Test: Clicking Test verified that your settings are correct. Samba Status: Check this item to see if the Samba drive is enabled and use to Get Status button...

  • Page 50: Recording Options

    TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera Recording Options Resolution: Select the profile from the drop-down menu. Refer to the Audio and Video section for more information on profiles. Record File Size: Select from 1 to 10 minutes in the pull-down menu.

  • Page 51: Snapshot

    TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera Snapshot Enable Snapshot: This option allows you to send an snapshot or still image from the camera attached to an E-mail or via an FTP server. Trigger Event: These 2 options determine when to transfer an image via email or ftp. The image is sent either based on a Motion Detection trigger or a D/I Signal 1 going active option.

  • Page 52: Preset Position

    The account user name assigned and used for accessing the FTP server. Password: The password used for the account username configured above. Host Name: The FTP server’s hostname or IP address. For example: ftp.trendnet.com. Path: The FTP server file system path to the directory where the image is uploaded to. For...

  • Page 53: Digital Output

    External Digital Input/Output Connectors Digital I/O Terminal Block Description The TV-IP612P/WN camera is equipped with a Input/Output termincal block that provides a single digital input and a relay to control external devices. Using Pins 1 and 2 allows you to connect a devices such as an external sensor (e.g.

  • Page 54: Trigger

    TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera Trigger Enable D/O Signal: Checking this box turns on the Digital Output to trigger external equipment such as alarm lights or sirens. Trigger Event Motion Detection:Checking the motion detection box causes the D/O pins to activate connected alarm devices upon motion being detected.

  • Page 55: Motion Detection

    TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera Motion Detection Live Video Enable Video Motion: The camera can be setup to record whenever motion is detected in the camera’s field of view and programmable predefined areas. Check this box to the motion detection function.

  • Page 56: Tools

    Reboot Device: Firmware Upgrade Please check the TRENDnet Support webpage to check if any new firmware version is available for your camera. The current firmware utilized by the camera is listed in the Firmware Upgrade page in the Firmware Information section.

  • Page 57: Device Info

    TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera Device Info Device Info Detailed information about your camera’ system and network settings can be found on this page Logs recorded by the camera can be viewed on this page. Click the Download button at the bottom of the page to save the log file to a text file on your hard drive.

  • Page 58: Viewing Video

    TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera Viewing Video The TV-IP612P /TV-IP612WN camera allows you to view video images using in your web browser. Click the Live View button on the screen to access the video images. Note: If you Left Click anywhere in the image this will cause the camera to position the center of the image over the point you clicked.

  • Page 59: Controlling The Camera

    TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera Controlling the Camera You can control the Camera’s viewing angle using the control buttons on the left-hand side of the viewing window. You can control video modes, audio modes, recording settings and digital output using the control panel underneath the image (described on the next page).
  • Page 60 TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera 10 10 11 11 12 12 1. Video 1 - Click this button to view the image using Video Profile 1 settings. Go to the Setup section Video/Audio – Video and Audio to change the Profile settings.

  • Page 61: Ipview Pro 2.0

    To launch IPView Pro 2.0 double click on the IPView Pro 2.0 icon on your desktop or go to Start > Programs > TRENDnet > IPView Pro 2.0 > IPView Pro 2.0. If this is the first time using the software, the menu that appears is the Add camera menu.

  • Page 62: Add A Camera For Monitoring

    TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera Add a camera for monitoring The Add camera menu is presented the first time the IPView Pro 2.0 software is launched. This menu is used to add cameras to the user interface for monitoring. After the first time running the software, this menu can be accessed at anytime from the Configuration menus.
  • Page 63 TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera If the camera does not appear listed, click the Input the location of camera tab above the list to view a new menu. Enter the IP address or the URL (for example, ipcam.ddns.org) of the camera being added, type the user name and password and click the Preview to verify that a link can be established.

  • Page 64: Ipview Pro 2.0 User Interface

    TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera IPView Pro 2.0 User Interface Below is a general description of the user interface. Item Description Display area for single or multiple cameras of live video. Right click on Live video display any display area to view a list of quick configure options for that area camera including the “Replace camera content …”...

  • Page 65: Display Controls

    TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera Camera configuration See below for detailed information. menu Use to quickly assess the status of operating cameras. Click on box to Camera status select camera display. The status indicators for each camera display recording, motion detection and GP input status.
  • Page 66 TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera Notice that when these functions are activated, the color of the icon changes from white to yellow. Audio and video controls - inactive Audio and video controls - activated...

  • Page 67: Live Video Display Controls

    TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera Live video display controls Use the video display controls to change the view of the live video display. This is useful for multiple camera application. Click the arrows to manually cycle through the active camera’s live displays when using a single camera display screen.

  • Page 68: Camera Configuration With Ipview Pro 2.0

    TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera Camera configuration with IPView Pro 2.0 Access the camera configuration menus by clicking on the gear icon at the bottom of the right hand panel of the IPView Pro 2.0 user interface. Configuration options include adding and deleting cameras from the display view, configuration of motion detection and digital input with schedules, recording options, email alerts and other network settings.

  • Page 69: Removing A Camera

    TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera 2. Select the camera to add from the list, enter the administrator’s user name (ID:) and password, a preview of the live video display will appear. Click the OK, add this camera button, a confirmation message informs when the camera is connected and added to the IPView Pro 2.0 monitoring group.

  • Page 70: Schedule Recording With Ipview Pro 2.0

    TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera Schedule Recording with IPView Pro 2.0 Use the Monitorng Settings menu to create schedules for recording and apply the schedules to any camera. Click the Monitoring Settings tab to view the Schedule Recording menu (the first menu viewed in the Camera Settings menu tab).
  • Page 71 TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera Create Schedule Templates To make a new schedule template, click the Edit Template button to view the Select schedule profiles dialog box. Use this new dialog box to create new schedules for recording. Click Edit profiles to...

  • Page 72: Setup Motion Detection And Digital Input With Ipview Pro 2.0

    TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera Setup Motion Detection and Digital Input with IPView Pro 2.0 The Camera Settings menus include Motion Detection setup and Digital Input control. Each menu has the schedule option to apply a schedule for the action taken or always take the specified action.

  • Page 73: Ipview Pro 2.0 Recording Options

    TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera IPView Pro 2.0 Recording Options The Recording Options configured in the IPView Pro 2.0 help to conserve and manage allowed memory storage (disk space) and for video file management. Recorded files can be limited by time elapsed or by size.

  • Page 74: Ipview Pro 2.0 Miscellaneous Options

    TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera IPView Pro 2.0 Miscellaneous Options The Other Options available for configuration include Proxy server setup, email notification, scan interval and alert type settings.

  • Page 75: Playing Video Files On A Computer

    TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera Playing Video Files on a Computer IPCamPlayer software is installed on the monitoring station or administrator’s system along with the IPView Pro 2.0 monitoring software. Use it to playback and manage recorded video from the cameras added to the IPView Pro 2.0 group.

  • Page 76: Load Saved Video Files

    My Documents folder in Windows. The file folders are named according to the IP address and camera model. For example, 192.168.10.30_TV-IP612P/W is the name of the file folder for the TV-IP612P/W using the default (non-DHCP) IP address. IPCamPlayer User Interface...

  • Page 77: Play Video Files

    TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera To view recorded video files in the IPCamPlayer, it is first necessary to locate and select the files to be viewed and add them to the list. Click the Search Files button in the IPCamPlayer main interface and a new menu appears.

  • Page 78: Ffdshow

    TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera ffdshow The ffdshow software is used for audio and video encoding and decoding, especially for MPEG-4 formats. It is free software used on Windows systems and enables the user to tweak media playback and select specific codecs and formats. For use with the IPCamPlayer, the default settings used for ffdshow installation are all that is needed.
  • Page 79 TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera 3. The InstallShield Wizard will appear, click Next in the welcome screen. 4. Accept the default location (Windows Programs folder) on the system for placement or Browse to choose an alternative, Click Next to continue.
  • Page 80 TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera 5. Click to check the components that will be installed. For IPCamPlayer it is only necessary to use the default components already selected. Click Next to continue. 6. Accept the default destination folder (ffdshow) or Browse to choose an alternative, Click...
  • Page 81 TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera 7. Click to check the additional tasks that will be installed. For IPCamPlayer it is only necessary to use the default formats already selected. Click Next to continue. 8. Click to check the video applications that use ffdshow. For IPCamPlayer it is only...
  • Page 82 TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera 9. Click to check the audio applications that use ffdshow. For IPCamPlayer it is only necessary to use the default applications already selected. Click Next to continue. 10. Choose a speaker setup or choose Disable mixer if unsure. The audio function will work regardless of what speaker setup is chosen.
  • Page 83 TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera 12. If desired, any of the three configuration utilities included with the ffdshow installation can be launched by checking the appropriate box. Click Finish to complete the installation. To download the latest copy of ffdshow please check the ffdshow website NOTE: http://ffdshow.en.softonic.com/...

  • Page 84: Appendix

    TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera Appendix A. Frequently Asked Questions Internet Camera Features What is an Internet Camera? An Internet Camera is a stand-alone system connecting directly to an Ethernet or Fast Ethernet network and supported by the wireless transmission based on the IEEE 802.11b/g/n standard.
  • Page 85 TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera Internet Camera Installation Can the Internet Camera be used outdoors? The Camera is not water-proof and it is not recomended to use it outdoors. But you can use our Outdoor Internet Camera Enclosure TV-H500 or the one with Heater and Fan model TV-H510 to install the camera outdoor.

  • Page 86: B. Ping Your Ip Address

    TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera B. PING your IP Address The PING (Packet Internet Groper) command can determine whether a specific IP address is accesible by sending a packet to the specific address and waiting for a reply. It can also be a useful tool in confirming whether an IP address conflicts with the Camera’s on the network.
  • Page 87 TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera 4. Type ping x.x.x.x, where x.x.x.x is the IP address of the Camera, as shown below: Reply messages indicate that there is another device on the nework, as indicated in the above window.

  • Page 88: Troubleshooting

    TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera C. Troubleshooting I cannot access the Camera from a web browser? The possible cause might by that the IP address of the Camera is already being used by another device. To correct the possible problem, you need to disconnect the Camera from the network first.
  • Page 89 TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera A2.2: Click the Network Connections icon as shown below:...
  • Page 90 TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera A2.3: Double-click the network adaptor that is connected to your Camera: Select TCP/IP from the “Network“ dialog box and from the TCP/IP Properties:...
  • Page 91 TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera Click the Properities button. Double-click the Internet Protocol (TCP/IP) item and check that the first 3 bytes of your computer’s IP address correspond with the first 3 bytes of the Camera’s. If the Camera is situated on a different subnet than your workstation, you will not be able to configure the Camera.
  • Page 92 TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera The wireless connection might be faulty. If your Camera is operating in Ad-Hoc mode make sure the Camera wireless channel and SSID are set to match the PC/Notebook and the Camera must match with the Access Point’s SSID.

  • Page 93: D. Time Zone Table

    TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera D. Time Zone Table Time Zone Location/Description (GMT - 12:00) Enjwetok, Kwajalein (GMT - 11:00) Midway Island, Samoa (GMT - 10:00) Hawaii (GMT - 09:00) Alaska (GMT - 08:00) Pacific Time (US & Canada; Tijuana)
  • Page 94 TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera Time Zone Location/Description (GMT + 01:00) Brussels, Copenhagen, Madrid, Paris, Vilnius (GMT + 01:00) Sarajevo, Skopje, Sofija, Warsaw, Zagreb (GMT + 02:00) Athens, Istanbul, Minsk (GMT + 02:00) Bucharest (GMT + 02:00) Cairo (GMT + 02:00)
  • Page 95 TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera Time Zone Location/Description (GMT + 09:00) Seoul (GMT + 09:00) Yakutsk (GMT + 09:30) Adelaide (GMT + 09:30) Darwin (GMT + 10:00) Brisbane (GMT + 10:00) Canberra, Melbourne, Sydney (GMT + 10:00) Guam, Port Moresby...

  • Page 96: E.technical Specifications

    TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera E.Technical Specifications Camera  General   Sensor: 1/4” CCD Sensor  Focal Length: f(wide) 3.8mm to f(tele) 38.0mm  F/No: F(wide)=1.8 , F(tele) = 2.8  LENS: Auto focus zoom lens with IR cut filter  Zoom Ratio: 10x optical zoom plus 16x digital zoom  Color: full color or black and white mode  Day & Night image modes: Automatic or scheduled transition between modes  Minimum illumination: Color: 0.7 lux@F1.8  B/W: 0.02 lux@F1.8  View:   ‐Wide Angle:    Horizontal: 51.3 degree  Vertical: 39.3 degree           ‐Max. Zoom Angle:    Horizontal: 5.6 degree  Vertical: 7.3 degree            Audio  Built‐in omni‐directional microphone  Sensitivity: ‐40dB +/‐ 3dB (5 meters max.)  Frequency: 100~20000Hz  S/N:  >60dB  Codec: ARM/PCM  Pan & Tilt  Pan: ‐165° ~ +165°  Tilt: up 84° and down 31°  Preset positions: 20   Auto Patrol and manual controls  Image & Video  Compression: simultaneous H.264 / MPEG‐4 / MJPEG  Profiles: up to 4 profiles simultaneously  IRIS Control /white balance control: automatic ...

  • Page 97: Ipview Pro 2.0  5

    TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera GPIO  Input: 1 set  Output: 1 set  Micro SD slot  Micro Secure Digital card (up to 16G)  Hardware  Network   IEEE 802.3u 10/100Mbps Auto‐MDIX Fast Ethernet  LED  Power, Link/Act   Reset Button  Reset to factory default  Power Consumption  12 Watts (max.)  Power  12V, 2A external power adapter  Dimension  125 x 130 x 125 mm (4.9 x 5.1 x 4.9 in.)  Weight  Camera: 800 g (28.22 oz.)   Temperature  Operating: 0°C ~ 45°C (32°F ~ 113°F)   Storage: ‐15°C ~ 60°C (5°F ~ 140°F)  Humidity  Max. 90% (non‐condensing)  Certifications  CE, FCC  Requirement  To View Camera   Internet Explorer 7.0 or above, Firefox 3.5 or above, Safari 4.0 or above  To Run Software  Windows 7 (32/64‐bit), Vista (32/64‐bit), XP (32/64‐bit)  IPView Pro 2.0  Channel: supports up to 32 cameras ...

  • Page 98: Security  1

    TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera Modulation  DQPSK, DBPSK, DSSS and CCK  OFDM: BPSK, QPSK, 16QAM, 64QAM  Antenna  2 x detachable 2dBi dipole antennas (Reverse‐SMA connector)  Date Rate  802.11b: up to 11Mbps  802.11g: up to 54Mbps  802.11n: up to 300Mbps  Security  64/128‐bit WEP, WPA/WPA2‐PSK  Output Power  802.11b: 18dBm (typical)  802.11g: 15dBm (typical)  802.11n: 13dBm ((typical)  Receiving Sensitivity  802.11b: ‐85dBm at 11Mbps  802.11g: ‐73dBm at 54Mbps  802.11n: ‐65dBm at 300Mbps  Channels  1~11 (FCC), 1~13(ETSI)  Management  Accounts  Up to 20 user accounts  Remote Login  Remote management supported  Backup / Restore  Save/retrieve configuration files  Log  System log up to 1023 entries  Settings  Image  Brightness, contrast, saturation, sharpness, white balance,  flip, mirror  (horizontal/vertical), black & white, day, night, schedule mode ...
  • Page 99 TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera Dynamic DNS  Yes  Time  Synchronize with NTP server or set time / date manually  ...
  • Page 100 Return Material Authorization (RMA) number will be issued. An RMA number is required in order to initiate  warranty service support for all TRENDnet products. Products that are sent to TRENDnet for RMA service  must  have  the  RMA  number  marked  on  the  outside  of  return  packages  and  sent  to  TRENDnet  prepaid,  insured  and  packaged  appropriately  for  safe  shipment.  Customers  shipping  from  outside  of  the  USA  and  Canada  are  responsible  for  return  shipping  fees.  Customers  shipping  from  outside  of  the  USA  are ...
  • Page 101   Governing Law: This Limited Warranty shall be governed by the laws of the state of California.    Some TRENDnet products include software code written by third party developers. These codes are subject  to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL").     Go  to  http://www.trendnet.com/gpl  or  http://www.trendnet.com  Download  section  and  look  for  the  desired TRENDnet product to access to the GPL Code or LGPL Code. These codes are distributed WITHOUT  WARRANTY  and  are  subject  to  the  copyrights  of  the  developers.  TRENDnet  does  not  provide  technical  support  for  these  codes.  Please  go  to ...
  • Page 102 TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera...

This manual is also suitable for:

Tv-ip612wn

Table of Contents