Installation; Product Description; Product Overview; Gsw-1600S/2400S Front Panel - Planet GSW-1600S User Manual

This section describes the functionalities of the Switch 's components and guides how to install it on the desktop or shelf.
Basic knowledge of networking is assumed. Please read this chapter completely before continuing.

2.1 Product Description

The PLANET GSW-1600S/GSW-2400S is a 16/24-port 10/100/1000 Mbps Web Smart with non-blocking wire-speed
performance Ethernet Switch. With 32/48Gbps internal switching fabric, the Switch can handle extremely large amounts of
data transmission in a secure topology linking to a backbone or high-power servers. The Switch could recognize up to 8K
MAC Address table and provides 512 KB on-chip frame buffers. The Switch offers wire-speed packet transfer performance
without risk of packet loss. With the high data throughput, it can provide the most convenient for user to upgrade their
network to Gigabit environment.
The additional Web Switch utility allows access Web interface of the Switch. Smart functions, such as per port speed,
duplex, flow-control and QoS settings, Trunking, port-based VLAN and port mirroring are supported.

2.1.1 Product Overview

The Switch is a Web Smart Gigabit Ethernet Switch with 16/24 RJ-45 10/100/1000Mbps ports for high-speed network
connectivity. The Switch can also automatically identify and determine the correct transmission speed and half/full duplex
mode of the attached devices with its 16/24 ports. The Gigabit port can handle large amounts of data transmission in a
secure topology linking to a backbone or high-power servers.
This Switch also supports store-and-forward forwarding scheme to ensure low latency and high data integrity, eliminates
unnecessary traffic and relieves congestion on critical network paths. With an intelligent address recognition algorithm,
Switch could recognize up to 8K/8K different MAC address and enables filtering and forwarding at full wire speed.
2.1.2 Switch Front Panel
Figure 2-1 & 2-2 shows a front panel of the Switch.
PWR
SYSTEM
1 2 3 4 5 6 7

2.1.3 LED Indicators

LED Color
PWR Green
SYSTEM Green
LNK/ACT Green
1000 Green
100 Green
LNK/ACT
1000
100
8 9 10 11 12 13 14 15 16
Figure 2-1 GSW-1600S front panel
Figure 2-2 GSW-2400S front panel
Lights to indicate that the Switch has power.
Lights and blinking to indicate the CPU is working.
Lights to indicate that the Switch is successfully connecting to the network.
Blinks to indicate the Switch is actively receiving or sending the data over the port.
Lights to indicate that the port is operating at 1000 Mbps. Off to indicate that the port is
operating at 100Mbps or 10 Mbps while the port 's Link is on.
Lights to indicate that the port is operating at 100 Mbps. Off to indicate that the port is
operating at 1000 Mbps or 10 Mbps while the port 's Link are on.
1 3 5 7 9
2 4 6 8 10
Function

2. INSTALLATION

11 13 15
12 14 16
3