Planet GSW-1600S User Manual page 18

MAC Address: display the Switch MAC Address.
Protocol version: display the version of the Utility protocol.
Product Name: display the Switch model name.
System Name: display the appointed Switch system name.
Location: display where the Switch is located.
Trap IP: display the IP address where the Trap to be sent.
Subnet Mask: display the Subnet Mask configuration of the Switch.
Gateway: display the Gateway configuration of the Switch.
View Trap: The trap function receives the events from Switch in the Monitor List. A light indicator beside the
"View Trap" button is to notice managers whether there are system events in the trap information box. Green
to indicate that no event in the trap information box, while red indicates that system events received, as shows
in Figure 3-15
Figure 3-15 View Trap button on Web Switch Utility
To view the system events, press on the "View Trap" button, the trap information message box will pop up to show the
system events, show in Figure 3-16.
The symbol "!" represents the trap signal arise, and will disappear after you review and click on the event information.
15