Power - Vision Fitness S7100 Owner's Manual

ASSEMBLY
It is recommended, when possible, that an authorized VISION FITNESS
retailer assemble your Suspension Elliptical Trainer. If you have elected
to assemble this product yourself, for your safety, please read and follow
each of the steps in the enclosed assembly instructions. If you have
any questions regarding any component or function of your Suspension
Elliptical Trainer, contact your retailer.
MOVING
Your VISION FITNESS Suspension Elliptical Trainer has transport wheels
included for ease of mobility. To move, firmly grasp the rear of the frame
assembly. Carefully lift and roll on the transport wheels.
CAUTION:
Our Suspension Elliptical Trainers are well-built and heavy,
weighing up to 147.5 kg / 325 lbs! Use care and additional help if
necessary.
6
PLACEMENT IN YOUR HOME
Please follow the safety instructions to place the Suspension Elliptical Trainer
in the location where it will best be used. It is important that you place
your Suspension Elliptical Trainer in a comfortable and inviting room. Avoid
putting your Suspension Elliptical Trainer in an unfinished basement or
undesirable setting. Exercise adherence will be easier to achieve only if you
exercise in an attractive setting.
STABILIZING THE SUSPENSION
ELLIPTICAL TRAINER
After positioning the Suspension
Elliptical Trainer in its intended
location, check the unit's stability.
Rocking or wobbling indicates
that your Suspension Elliptical
Trainer needs to be leveled.
Determine which leveler is not
resting completely on the floor.
Loosen the nut at the base of
the leveler to allow the leveler to
rotate. Now rotate the leveler to
the left or right until the Suspension
Elliptical Trainer is stable. Lock the
adjustment by tightening the nut
against the support tube.
TURNING THE UNIT ON AND OFF
Use the power switch on the front
of the unit to turn the machine ON
and OFF. It is recommended to
turn the machine off when not in
use.
NOTE
: You can also turn the power
off at the console.
LOOSEN
ROTATE
TIGHTEN
7