Troubleshooting; Chest Strap - Vision Fitness S7100 Owner's Manual

TROUBLESHOOTING

Our Suspension Elliptical Trainers are designed to be reliable and easy
to use. If, however, you have a problem, these troubleshooting steps may
reveal the cause.
PROBLEM: The console does not light up.
SOLUTION: Check to make sure the power switch located on the
backside of the console is turned on.
SOLUTION: Make sure the power cord is plugged into the base of the
Suspension Elliptical Trainer, and the power switch located near the plug
is on.
SOLUTION: Make sure the wire harness is plugged into the back of the
console.
PROBLEM: You feel a thump or hitch in the stride motion.
SOLUTION: Check assembly and tightness of all hardware.
SOLUTION: Check the bolts and the bracket under the footplate.
NOTE:
If the above steps fail to remedy the problem, discontinue use, turn
the power off and contact your retailer.
28
TROUBLESHOOTING YOUR HEART RATE MONITOR CHEST STRAP
PROBLEM: No pulse reading appears.
SOLUTION: There may be a poor connection between the contact
pads and skin. Remoisten the contact pads.
SOLUTION: Transmitter is not properly positioned; reposition the chest strap.
SOLUTION: Verify that the distance between the transmitter and receiver is
not beyond the recommended range of 91.4 cm / 36 inches.
PROBLEM: There is an erratic pulse rate.
SOLUTION: Chest strap is too loose; readjust according to directions.
NOTE:
It is possible that heart rate monitors will not function properly
on some people for a variety of reasons. It may be necessary to
experiment with the fit and position of the chest strap. Outside interference
sources such as computers, motors, electric dog fences, home security
systems, remote controls, CD players, fluorescent lights, etc., may cause
problems for heart rate monitors.
29