System Memory; Memory Installation Procedures - Advantech AIMB-212 User Manual

1.9

System Memory

The AIMB-212 has one socket for a 200-pin SODIMMx1.
All these sockets use 1.8 V unbuffered double data rate synchronous DRAMs (DDR
SDRAM). They are available in capacities of 256, 512, and 1024 MB. The sockets
can be filled in any combination with DIMMs of any size, giving a total memory size
between 256 MB and 2 GB. AIMB-212 does NOT support ECC (error checking and
correction).
1.10

Memory Installation Procedures

To install SODIMMs, first make sure the two handles of the SODIMM socket are in
the "open" position, i.e., the handles lean outward. Slowly slide the SODIMM module
along the plastic guides on both ends of the socket. Then press the SODIMM module
well down into the socket, until you hear a click when the two handles have automat-
ically locked the memory module into the correct position of the SODIMM socket. To
remove the memory module, just push both handles outward, and the memory mod-
ule will be ejected by the mechanism.
AIMB-212 User Manual 12