Step 1: Choose A Location; Table 1-1 Location Criteria - HP SureStore 4115w User Manual

Step 1: Choose a Location

Choose a location that meets the following criteria. Take the library there before
unpacking it.
Table 1-1 Location Criteria
Room temperature
Power source
Air quality
Adequate
clearance
50-104° F (10-40° C)
AC power voltage: 100-127 V or 200-240 V
Minimal sources of particulate contamination. Avoid areas
near frequently used doors and walkways, stacks of
supplies that collect dust, and smoke-filled rooms.
CAUTION: Excessive dust and debris can damage tapes
and tape drives.
Standalone configuration — free standing or against a
wall/desk:
Back 56 cm (22 in.) for cooling and service.
Front 86 cm (34 in.) for operator access.
Sides 56 cm (22 in.) for removal of the external
cover.
If less space is allowed, move the library to an open area
before servicing.
Rack mount configuration:
Back Allow adequate room to open the rear door of
the rack for service access, usually 46-61 cm
(18-24 in.), depending on the rack.
Front 86 cm (34 in.) for operator access.
Height For ease of use, install the library so the
bottom is 60-120 cm (24-48 in.) above the
floor. Do not install the library in the bottom
rail position because of clearance.
Installing the Tape Library
Step 1: Choose a Location
1-3