Table of Contents
Advertisement
Operating the Library
Understanding Display Window Messages
Control Panel Options
Press
or
while the library is in the "ready" state to display first-level
PREV
NEXT
options. Access second-level options from ADMIN * (second level options require a
password; see "Entering the Administration Menu Password" on page 3-9).
An asterisk (*) indicates that the option has multiple selections.
When a menu selection is flashing, press
option's selections. Press
First Level Options
RELEASE DOOR
VIEW BAR
CODES *
ADMIN *
LOAD DRIVE *
UNLOAD DRIVE *
3-6
ENTER
or
to display other available options.
PREV
NEXT
Select to allow the access door to be unlocked.
Select to view the bar code labels on each tape cartridge
by slot number.
Accesses second-level options.
Loads a tape from a slot to the drive. To load a tape:
1. Select the drive that you want to load a tape into.
2. Select the tape that you want to load. The control
panel displays the barcode number and slot number.
Press
or
PREV
NEXT
3. The control panel displays the drive it is loading to.
TAPE LOADED displays when complete.
Unloads a tape from the drive to the slot it came from.
1. Press
or
PREV
NEXT
to unload. Press
ENTER
SOURCE IS EMPTY displays.
2. The activity light flashes green and TAPE
UNLOADED flashes when complete.
to select the option or display the
to select, then
.
ENTER
to select the drive that you want
. If a tape is not in the drive,
Advertisement
Table of Contents
