Error Messages; Error Messages Displayed By The Pc - Fujitsu 5000 Series User Manual

Table of Contents

Advertisement

1 Error Messages

This section provides a list of error messages and suitable responses thereto. Consult this section
as required.

Error messages displayed by the PC

Error Message
An error occurred at address
xxxx during a system memory
test.
An error occurred at address
xxxx during an additional
memory test.
System cache error-Cache
disabled
An error occurred during a
keyboard controller test.
An error occurred during a
keyboard test.
An error occurred during a
floppy disk drive test.
46
Description and necessary action
If an extended RAM module is used, remove the
module and determine whether the error recurs. If this
message is not displayed, an extended RAM module
error is expected. Replace with another extended
RAM module and determine whether the error recurs.
If the error recurs, contact a dealer or the Fujitsu
service center.
Confirm that the extended RAM module is mounted
properly and is a Fujitsu product. If the error recurs,
contact a dealer or the Fujitsu service center.
contact a dealer or the Fujitsu service center.
Set the MAIN switch to OFF, then wait ten seconds
and set to ON again. If the message is still displayed,
contact a dealer or the Fujitsu service center.
If an external keyboard is connected, confirm that it is
connected correctly and turn on the power again. If
this message is still displayed, contact a dealer or the
Fujitsu service center.
Confirm that 'Floppy Disk Drive A' is set properly on
the BIOS setup main menu and that the floppy disk
drive is mounted correctly.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Deskpower 5000 series

Table of Contents