Expansion Card Installation Procedure For A Pc Using Windows Nt - Fujitsu 5000 Series User Manual

Expansion card installation procedure for a PC using
Windows NT
Before installing the expansion card,
check the resources that can be set for
the expansion card to be installed.
Are the resources required by the expansion
card unused resources of the PC?
Is the expansion card to be installed
Plug & Play compatible?
Install the expansion card.
See "Installing an
expansion card"
subsequently
described in this
section.
Lock the resources.
Set the device driver for the expansion card.
End. The expansion card is ready for use.
Start
Yes No
Release the resources by
disabling the expansion card or
the hardware that will not be used
by the PC.
Yes No
Register the resources required by
the expansion card.
Allocate the resources required by
the expansion card to idle resources
of the PC (by pin setting for resource
allocation).
Install the expansion card.
See the manual included with the
expansion card.
See the manual included with the
expansion card.
For the allocation procedure, see the manual
included with the expansion card.
See the manual included with the
expansion card.
For the setup procedure, see the
manual included with the expansion
card.
29