Fujitsu 5000 Series User Manual page 53

- To install a floppy disk drive:
Connect the flat cable to the expansion card
of the internal floppy disk drive in the expansion
slot.
8
Connect the power cord.
Connect the unused power cord to the connector
of the installed internal option.
9
Install the blank panel (for an option that
does not require a medium be mounted/
dismounted)
Install the blank panel with the screw that were
removed in step 4.
10
Attach the front panel.
Install or remove the blank panel as required.
Point
To install a 3.5-inch floppy disk drive or magneto-optic disk drive, install the accessory expansion
bay panel to the front panel by screws.
5-inch blank panel
Rear of
the panel
Hook
Bend the
hook inward.
43