Fujitsu 5000 Series User Manual page 50

11
Attach the front panel.
Remove the blank panel for a 3.5-inch
expansion bay from the rear side of the front
panel as required in the arrow direction shown
in the figure.
12
Attach the upper cover.
13
Use BIOS setup to configure the internal
option.
To configure the installed IDE-standard internal
option, use the main menu of BIOS setup (
see "Main Menu,""BIOS Setup").
Point
To remove the internal option, reverse the above procedure.
Point
BIOS Setup
A guide to your Deskpower 5000 BIOS is available online. Please visit our technical support
section at www.fujitsu-pc-asia.com. Once there, click on the desktop series from the pull down
menu and select the appropriate desktop model.
40
3-inch blank panel
Rear of
the panel
Hook
Bend the
hook inward.