Table of Contents
Advertisement
9.1.3
Restore Default
Clicking the Restore Default Configuration option in the Restore Settings screen can
restore the original factory installed settings.
NOTE: This entry has the same effect as the hardware reset-to-default button.
The CT-5372E board hardware and the boot loader support the reset to default
button. If the reset button is continuously pushed for more than 5 seconds, the
boot loader will erase the entire configuration data saved on the flash memory.
NOTE: Restoring system settings requires a system reboot. This necessitates that
the current Web UI session be closed and restarted. Before restarting the
connected PC must be configured with a static IP address in the 192.168.1.x subnet
in order to configure the CT-5372E.
104
Advertisement
Table of Contents
