Performing Volume Security Operations; Launching Volume Security; Viewing Security Settings - HP STORAGEWORKS XP24000 User Manual

4 Performing Volume Security Operations

This chapter explains the following Volume Security operations:
Launching Volume Security (see
Viewing Security Settings (see
Enabling only the specified hosts to access certain volumes, so that the other hosts cannot access
the volumes (see
Preventing all the hosts to access volumes (see
Preventing data in volumes from being overwritten by copy operations (see
Protecting Volumes from Copy
Disabling security (see

Launching Volume Security

This section describes how to start the Volume Security software.
If Volume Security Port Option is installed, the functions of the Volume Security Port Option program
will become usable when you start Volume Security.
To start the Volume Security software:
1. Log on to the Remote Web Console main window. For details, see the HP StorageWorks
XP24000/XP20000 Remote Web Console User s Guide.
To make security settings and apply the settings, you must use a user account that has the write
permission (For example, the Administrator account). If you use a user account that does not have
the write permission, you will be able to view security settings but will neither be able to make
security settings nor apply security settings.
2. Click Go, Mainframe Connection, and then Volume Security on the menu bar of the Remote Web
Console main window.
The Volume Security window appears (see
To set security using Volume Security, you must make sure that Remote Web Console is in
Modify mode. For detailed information on how to do this, see the HP StorageWorks
XP24000/XP20000 Remote Web Console User s Guide.

Viewing Security Settings

This section describes how to view security settings.
Locating Volumes in a Specified Security Group (see
"Locating Volumes in a Specified Security
Locating Security Groups that Contain a Specified Host (see
"Locating Security Groups that Contain a Specified
Locating Volumes in a Security Group that Contains a Specified Host (see
"Locating Volumes in a Security Group that Contains a Specified
Launching Volume
Viewing Security
Limiting Host Access, page 47)
Operations, page 57)
Disabling Volume
XP24000/XP20000 Volume Security User's Guide
Security, page 43)
Settings, page 43)
Prohibiting Host Access, page 53).
Security, page 58listedref)
Figure 4).
Group" on page 44)
Host" on page 44)
Host" on page 44)
43