The Ldev To Host Dialog Box; The Ldev To Security Group Dialog Box - HP STORAGEWORKS XP24000 User Manual

Figure 19 The LDEV to Security Group Dialog Box
Item
LDKC
CU
LDEV table
Security Group
table
OK

The LDEV to Host Dialog Box

The LDEV to Host dialog box
Security window
when you right-click a volume from the lower right table and then select LDEV to Host from the
pop-up menu.
38 Using the Volume Security GUI
Description
Indicates the number of the selected LDKC.
Specifies a CU image number.
Describes the available LDEVs:
LDEV indicates a number assigned to the LDEV.
Emulation indicates the emulation types of the volume.
NOTE:
A volume ID ending in # (for example, 00#) indicates the volume is an
external volume.
Lists security groups in which the specified volume is registered:
Security Group indicates the name of a security group.
Security indicates whether the security settings in the security group are enabled or
disabled.
Group Status indicates whether the security group is an access group or a pool group.
T-VOL/R-VOL indicates whether volumes in the security group can be used as second-
ary volumes (i.e., copy destination volume). Enable indicates the volumes can be used
as secondary volumes. Disable indicates the volumes cannot be used as secondary
volumes.
Closes the dialog box.
(Figure 20) appears when you do either of the following in the Volume
(Figure 4):