The Select Ldev Dialog Box - HP STORAGEWORKS XP24000 User Manual

Item
OK
Cancel

The Select LDEV Dialog Box

The Select LDEV dialog box

of the Volume Security window
This dialog box enables you to:
register volumes (LDEVs) in an LDEV group (see
51 or "Registering Volumes in an LDEV
delete volumes from an LDEV group (see
Figure 12 The Select LDEV Dialog Box
Item
LDKC
LDEV Group
CU
Description
Applies settings in the Add/Change Host dialog box to the Volume Security window, and
then closes the dialog box.
CAUTION:
Clicking OK applies the settings to the Volume Security window, but does not apply the
settings to the storage system. To apply the security settings to the storage system, you
must continue to click Apply in the Volume Security window until they appear in the
dialog box.
Discards settings in the Add/Change Host dialog box and closes the dialog box
(Figure 12) appears when you right-click an LDEV group in the tree view
(Figure 4), select Specify and then LDEV from the pop-up menu.
Description
Indicates the number of the selected LDKC
Specifies the name of the LDEV in which the volumes are registered.
Selects the number of the logical CU image. The two tables below this list provide in-
formation about the volumes in the selected CU image.
"Registering Volumes in an LDEV
Group" on page 54)
"Deleting Volumes from LDEV
XP24000/XP20000 Volume Security User's Guide
Group" on page
Groups" on page 65)
29