The Specify Security Group Dialog Box - HP STORAGEWORKS XP24000 User Manual

Item
OK
Cancel

The Specify Security Group Dialog Box

The Specify Security Group dialog box

group in the tree view of the Volume Security window
Group from the pop-up menu.
This dialog box enables you to register a host group and an LDEV group in a security group (see
"Registering a Host Group and an LDEV Group in a Security
Figure 14 The Specify Security Group Dialog Box
Item
LDKC
Select Security Group
Host Group
LDEV Group
OK
32 Using the Volume Security GUI
Description
Applies settings in the Select Port dialog box to the Volume Security window, and then
closes the Select Port dialog box.
CAUTION:
Clicking OK applies the settings to the Volume Security window, but does not apply
the settings to the storage system. To apply the security settings to the subsystem,
you must continue to click Apply in the Volume Security window until they appear
in the dialog box.
Discards settings in the Select Port dialog box, and then closes the dialog box.
(Figure
Description
Indicates the number of the selected LDKC.
Specifies the security group in which you want to register a host group and an LDEV
group.
Specifies a host group that you want to register in the security group.
Specifies an LDEV group that you want to register in the security group.
Applies settings in the Specify Security Group dialog box to the Volume Security
window and closes the dialog box.
CAUTION:
Clicking OK applies the settings to the Volume Security window, but does not
apply the settings to the storage system. To apply the security settings to the
subsystem, you must continue to click Apply in the Volume Security window
until they appear in the dialog box.
14) appears when you right-click an LDKC or a security
(Figure 4), select Specify and then Security
Group" on page 53).