Deleting Ldev Groups - HP STORAGEWORKS XP24000 User Manual

CAUTION:
Here, the change in the window has not been applied to the storage system.
9. Click Apply in the Volume Security window
A message appears and asks if you want to apply the change to the storage system.
10. Click Yes.
The change is applied to the storage system.

Deleting LDEV Groups

To delete an LDEV group, take the following steps.
To delete an LDEV group:
1. Ensure that you are in Modify mode.
2. In the Volume Security window
3. Do either of the following:
Right-click an LDEV group in the tree view.
Right-click LDEV Group in the tree view and then select Add/Change from the pop-up menu.
Next, in the Add/Change LDEV Group dialog box
groups in the LDEV Group List table and right-click the selection.
4. Select Delete from the pop-up menu.
A message appears and asks if you want to delete the specified LDEV group(s).
5. Click Yes to close the message. If the Add/Change LDEV Group dialog box
mains displayed, click OK to close the dialog box.
CAUTION:
Here, the change in the window has not been applied to the storage system.
6. Click Apply in the Volume Security window
A message appears and asks if you want to apply the change to the storage system.
7. Click Yes.
The change is applied to the storage system.
(Figure 4).
(Figure 4), double-click an LDKC number.
(Figure 4).
XP24000/XP20000 Volume Security User's Guide
(Figure 10), select one or more LDEV
(Figure 10) still re-
67