The Select Port Dialog Box - HP STORAGEWORKS XP24000 User Manual

Item
Registered in LDEV
Group table
Not Registered in
LDEV Group table
Regist
Not Regist
OK
Cancel

The Select Port Dialog Box

To use the Select Port dialog box, you must ensure that Volume Security Port Option is already installed.
The Select Port dialog box
the Volume Security window
Select Port dialog box enables you to register ports in the specified host group (see
"Registering Ports in a Host
30 Using the Volume Security GUI
Description
Lists volumes registered in the LDEV group. One table row indicates one volume.
The LDEV column indicates LDEV numbers.
NOTE:
If a volume ID is displayed with a pound sign (for example, 00#), the volume
is an external volume.
The Emulation column indicates emulation types of volumes. If an asterisk (*) appears
in the cell on the right, the volume is a secondary volume (that is, copy destination
volume for copy operations) or an ShadowImage for Mainframe reserved volume.
If a plus symbol appears in the cell on the right, one or more LU paths are assigned
to the volume.
Lists volumes that not registered in the LDEV groups. One table row indicates one volume.
LDEV displays the LDEV numbers.
The Emulation column indicates emulation types of volumes.
Select All selects all volumes in the table.
Registers volumes in the LDEV group. Select volumes in Not Registered in LDEV group
and then click this button to move the selected volumes to Registered in LDEV group.
Deletes volumes from the LDEV group. Select volumes in Registered in LDEV group and
then click this button to move the selected volumes to Not registered in LDEV group.
Applies settings in the Select LDEV dialog box to the Volume Security window and closes
dialog box.
CAUTION:
Clicking OK applies the settings to the Volume Security window, but does not
apply the settings to the storage system. To apply the security settings to the
subsystem, you must continue to click Apply in the Volume Security window until
they appear in the dialog box.
Discards settings in the Select LDEV dialog box and closes the box
(Figure 13) appears when you right-click a host group in the tree view of
(Figure 4) and then select Specify -> Port from the pop-up menu. The
Group" on page 49).