Host Group To Security Group Dialog Box; The Host To Ldev Dialog Box - HP STORAGEWORKS XP24000 User Manual

Figure 16 The Host to LDEV Dialog Box
Item
LDKC
Host
CU
LDEV table
OK

Host Group to Security Group Dialog Box

The Host Group to Security Group
of the Volume Security window
the pop-up menu.
The List -> Host Group to Security Group pop-up command does not display if you double-click
a security group and then right-click a host group or LDEV group from immediately below the
security group.
This dialog box enables you to specify a host group and then displays security groups in which the
specified host group is registered (see
Group" on page 46).
Description
Indicates the number of the selected LDKC
Provides information about a host, where the number groups, from left to right, indicate:
First: The Type/Model the type and model number of a host (or a channel extender).
Second: The Node ID of a host (or a channel extender).
Third: The Logical Partition Number of the host.
Fourth: The vendor of the host. Vendors include FJT (Fujitsu), IBM, HTC (Hitachi), and
CNT(Ex). If CNT(Ex) appears, the table row indicates the type, model number, and node
ID of a channel extender.
Specifies a CU image number.
Lists host groups in which the specified CU is registered.
LDEV indicates the name of an LDEV. A volume ID ending in # (for example, 00#) indic-
ates the volume is an external volume.
Emulation indicates the emulation types of volumes.
Closes the dialog box.
(Figure
(Figure 4) and then select List -> Host Group to Security Group from
"Locating Security Groups that Contain a Specified Host
17) appears when you right-click an item in the tree view
XP24000/XP20000 Volume Security User's Guide 35