Registering A Host Group And An Ldev Group In A Security Group; Prohibiting Host Access; Creating An Ldev Group - HP STORAGEWORKS XP24000 User Manual

Registering a Host Group and an LDEV Group in a Security Group

Now that you have classified your security group as an access group, your next (and the last) task is
to register your host group and LDEV group into the security group. When you finish registration, the
volumes in the LDEV group are secured and can only be accessed by hosts in the host group. Other
hosts cannot access the volumes.
To register a host group and an LDEV group into a security group:
1. Ensure that you are in Modify mode.
2. In the Volume Security window
3. Right-click a security group.
A pop-up menu appears.
4. Select Specify and then Security Group from the pop-up menu.
The Specify Security Group dialog box
5. Use the Select Security Group drop-down list to select the security group in which you want to
register a host group and an LDEV group.
6. Use the Host Group drop-down list to select the host group that you want to register in the security
group.
7. Use the LDEV Group drop-down list to select the LDEV group that you want to register in the se-
curity group, and then click OK.
8. Click Apply in the Volume Security window
A message appears and asks if you want to apply the settings to the storage system.
9. Click Yes.
The settings are applied to the storage system.
CAUTION:
If the Error Detail dialog box (section
the Caution in

Prohibiting Host Access

Volume Security enables you to prohibit all the hosts from accessing the specified volumes. To do this,
take the following major steps:
Creating an LDEV group (see
Registering volumes in the LDEV group (see
Creating a security group and classifying the security group as a pool group (see
"Creating a Security Group for Use As a Pool
Registering the LDEV group in the security group
("Registering an LDEV Group in a Security

Creating an LDEV Group

To specify volumes that should be secured, you must create an LDEV group and then register the
volumes in the LDEV group.
(Figure
The Error Detail Dialog
Port-Level Security Implementation" on page 10 and then remove errors.
"Creating an LDEV
XP24000/XP20000 Volume Security User's Guide
4), double-click an LDKC number.
(Figure 14) appears.
(Figure 4).
Box" on page 41) appears, see
Group" on page 53)
"Registering Volumes in an LDEV
Group" on page 55)
Group" on page 56)
Group" on page 54)
53