Table of Contents
Advertisement
Charge your HP iPAQ Glisten
CAUTION:
are correctly aligned before connecting.
Your iPAQ will fully charge in approximately 2–4 hours. Charging might take more time when your
iPAQ is connected to a powered computer or non-HP accessories.
To charge the battery:
1.
Plug the USB sync cable into the phone.
2.
Attach the USB sync cable to the power adapter.
3.
Plug the power adapter into a standard AC outlet.
TIP:
Charge the battery by connecting your iPAQ to a USB port on your computer using the USB
sync cable. If Microsoft
your computer, it appears on your computer screen.
USB charging is enabled by default on your iPAQ. To disable USB charging, press Start
then tap Settings > Power > USB Charging tab. On the Power screen, clear the Use USB
Charging check box, and then tap OK.
To avoid damaging your iPAQ or AC adapter, make sure that all the metal connectors
ActiveSync
®
or Windows Mobile Device Center (WMDC) is installed on
®
Charge your HP iPAQ Glisten
, and
7
Advertisement
Table of Contents
Need help?
Do you have a question about the Cell Phone and is the answer not in the manual?