Send A Contact's Information As A Vcard; Add A Contact Picture; Assign A Ring Tone To A Contact - HP Cell Phone User Manual

Send a contact's information as a vCard

From your contact list, you can send a contact's information to someone else using the vCard format via
a multimedia message. The vCard is sent as an attachment, and can be opened in other email programs.
1.
Press Start
2. Tap a contact, tap Menu > Send as vCard.
3. In the To box, enter an email address or phone number. Separate multiple phone numbers and
email addresses with semicolons.
4. In the Subject box, enter a subject. Tap Insert text here, enter a message, and then tap Send.
TIP:
Insert audio.

Add a contact picture

1. Press Start
2. Tap the contact, and then tap Menu > Edit.
3. Tap Picture, tap a picture of your choice, and then tap OK.
NOTE:
picture, tap Camera. Press the Center Select key to take a picture. The picture is added to the
contact. Tap OK.
TIP: To remove the contact picture, tap the contact. Tap Menu > Edit, and then tap Menu >
Remove Picture.

Assign a ring tone to a contact

1.
Press Start
2. Tap the contact, and then tap Menu > Edit.
3. In the contact information screen, tap Ring tone, and then tap a ring tone.
4. Tap OK.
NOTE:
50 Chapter 11 Manage your contacts
, and then tap Contacts.
If you want to add a picture or video, tap Insert picture/video. To add audio, tap
, and then tap Contacts.
To take a picture with the camera and add it to your contact, instead of tapping a
, and then tap Contacts.
You cannot assign ring tones to SIM contacts.