Table of Contents
Advertisement
1.
Press Start
2.
On the Bluetooth screen in Settings, on the Devices tab, tap Add new device. Your iPAQ
searches for other devices with Bluetooth capabilities and displays them in the list.
3.
Select the device from the list, and then tap Next.
4.
If you want to set a passkey, which is recommended for enhanced security, enter an alphanumeric
passcode between 1 and 16 characters in the Passcode box, and then tap Next. Otherwise,
leave the passcode blank, and tap Next.
NOTE:
numeric passcode.
5.
Enter the same passcode on the other device.
6.
When the other device is paired with your phone, on the Settings screen, tap OK.
If you cannot discover another device, try the following:
Make sure Bluetooth is turned on.
●
Move the devices closer to each other.
●
Make sure the device you are attempting to connect is on and visible to other devices.
●
Delete a Bluetooth partnership
1.
Press Start
2.
In the device list, tap and hold the device name, and then tap Delete.
Accept a Bluetooth partnership
1.
Make sure that your iPAQ is visible and within close range (up to 10 meters, or about 30 feet) of
the pairing device.
2.
Press Start
tab.
3.
Select the Make this device visible to other devices check box, and then tap OK.
4.
When prompted to accept a partnership with the device that is requesting the relationship, tap
Yes.
5.
If a passkey is requested, enter an alphanumeric passkey between 1 and 16 characters in the
Passkey box, and then tap Next.
6.
When your phone is paired with the Bluetooth device, tap Done.
, tap Wireless Manager, and then tap Menu > Bluetooth Settings.
For creating partnerships with cellular phones, it is mandatory that you provide a
, tap Wireless Manager, and then tap Menu > Bluetooth Settings.
, tap Wireless Manager, and then tap Menu > Bluetooth Settings > Mode
Delete a Bluetooth partnership 113
Advertisement
Table of Contents
