Table of Contents
Advertisement
7.
Tap Next.
To use authentication, select an authentication method from the Authentication list.
●
To use data encryption, select an encryption method from the Data Encryption list.
●
To automatically use a network key, tap The key is automatically provided check box.
●
You can also enter the Network key and Key index.
8.
Tap Next.
9.
If the network requires network access control, select the Use IEEE 802.1x network access
control, and then specify the EAP type from the list.
10.
Tap Finish.
Find your IP address
Find your iPAQ IP address to verify that an address is assigned to the network and your iPAQ is able to
access the network.
1.
Connect to a network automatically or manually by pressing Start
and then tap Menu > Wi-Fi Settings.
2.
Tap the Network Adapters tab.
3.
In the Tap an adapter to modify settings list, select an adapter, and then tap Edit to view
the IP address.
Delete a Wi-Fi network
You can delete networks you manually enter. However, you cannot delete automatically detected
networks.
To delete an existing or available wireless network:
1.
Press Start
2.
In the Configure Wireless Networks box, select the Wi-Fi network to delete.
3.
Tap Menu > Remove Settings.
Open Wi-Fi settings
Access Wi-Fi settings to add, edit, and delete Wi-Fi connections on your iPAQ.
To open Wi-Fi settings:
1.
Press Start
2.
Modify the settings you want to change.
3.
Tap OK.
, tap Wireless Manager, and then tap Menu > Wi-Fi Settings.
, tap Wireless Manager, and then tap Menu > Wi-Fi Settings.
, tap Wireless Manager,
Find your IP address 111
Advertisement
Table of Contents
