Table of Contents
Advertisement
Change the display name of a Bluetooth partnership
1.
Press Start
2.
Tap and hold the device name, and then tap Edit.
3.
In the Display Name box, enter a new name for the partnership, and then tap Save.
Connect to a computer using Bluetooth
Connect to a Bluetooth-enabled computer using ActiveSync or Windows Mobile Device Center.
1.
Follow the instructions in the synchronization software help on the computer for configuring
Bluetooth on your computer to support ActiveSync.
2.
Press Start
3.
Tap Menu > Connect via Bluetooth. Make sure your iPAQ and computer are within close range.
NOTE:
the Bluetooth wizard on your iPAQ and set up a Bluetooth partnership with the computer.
4.
Tap Sync.
5.
To disconnect when you do not require the Bluetooth connection, tap Menu > Disconnect.
TIP:
To preserve battery power, turn off Bluetooth when not in use. For best results, connect your
iPAQ to the computer using a USB cable to establish a synchronization before connecting through
Bluetooth.
Use your iPAQ as a wireless modem with Bluetooth
Use your iPAQ as a wireless modem to connect your Bluetooth-enabled computer to the Internet. For
more information, see
Set up an incoming or outgoing Bluetooth
communications (COM) port
1.
Make sure your iPAQ is connected to the other device through Bluetooth.
2.
Press Start
3.
Tap the COM Ports tab.
4.
Tap New Incoming Port or New Outgoing Port.
NOTE:
(COM) connection.
5.
Select a numbered COM port from the list.
NOTE:
114 Chapter 21 Use Bluetooth
, tap Wireless Manager, and then tap Menu > Bluetooth Settings.
, tap Tools > ActiveSync.
If this is the first time you have connected to this computer through Bluetooth, complete
Use your HP iPAQ Glisten as a wireless modem on page
, tap Wireless Manager, and then tap Menu > Bluetooth Settings.
New Outgoing Port is available only if at least one Bluetooth device supports serial
If the port cannot be created, it is already in use. Select a different numbered port.
135.
Advertisement
Table of Contents
