Dell LATITUDE D630 PP24L User Manual page 128

NOTICE:
keep them separate from any new modules that you may have, even if you purchased the new modules
from Dell. If possible, do not pair an original memory module with a new memory module. Otherwise, your
computer may not function at optimal performance.
NOTE:
Your computer has two user-accessible SODIMM sockets, one accessed from beneath the keyboard
(DIMM A), and the other accessed from the bottom of the computer (DIMM B).
To add or replace a memory module in the DIMM A connector:
Follow the procedures in "Before You Begin" on page 123.
1
Remove the hinge cover (see "Hinge Cover" on page 125).
2
Remove the keyboard (see "Keyboard" on page 126).
3
NOTICE:
module securing clips.
If you are replacing a memory module, ground yourself and remove the existing module:
4
Use your fingertips to carefully spread apart the securing clips on each end of the memory
a
module connector until the module pops up.
Remove the module from the connector.
b
130
Adding and Replacing Parts
If you remove your original memory modules from the computer during a memory upgrade,
Memory modules purchased from Dell are covered under your computer warranty.
1 memory module (DIMM A)
To prevent damage to the memory module connector, do not use tools to spread the memory-
2
securing clips (2)
1
2