Media Bay; Removing Media Bay Devices - Dell LATITUDE D630 PP24L User Manual

NOTICE:
damage the connector.
Attach the bezel to the new drive with the screw.
6
Slide the hard drive into the bay until it is fully seated.
7
Replace and tighten the screws.
8
Use the Operating System media to install the operating system for your computer (see "Using
9
the Operating System Media" on page 121).
Use the Drivers and Utilities media to install the drivers and utilities for your computer (see
10
"Reinstalling Drivers and Utilities" on page 116).

Media Bay

NOTE:
is running and connected to a docking device (docked).

Removing Media Bay Devices

NOTICE:
computer. Avoid pressing down on them or placing heavy objects on top of them.
If present, remove the device locking screw from the bottom of the computer.
1
If the computer is running, double-click the Safely Remove Hardware icon on the taskbar,
2
click the device you want to eject, and click Stop.
Press the device latch release.
3
142
Adding and Replacing Parts
Use firm and even pressure to slide the drive into place. If you use excessive force, you may
If the device locking screw is not present, you can remove and install devices while the computer
To prevent damage to devices, store them in a safe, dry place when they are not installed in the