A Troubleshooting; Diagnosing Switch Indicators; The Power Led Is Off; Power And Cooling Problems - SMC Networks SMCFS1601 User Manual

A
T
D
IAGNOSING
T P LED
HE OWER
Make sure the AC power cord is connected to the switch and power source
◆
properly.
Make sure the power source is ON.
◆
T L /A
HE INK CT
C
ORRESPONDING
Make sure that the cable connectors are firmly plugged into the switch and
◆
the device.
Make sure the connected device is turned on and working properly.
◆
The cable must be less than 100 meters long (328 feet).
◆
Check the port on the attached device and cable connections for possible
◆
defects. Replace the defective cable if necessary.
P
OWER AND
If the power indicator does not turn on when the power cord is plugged in, you
may have a problem with the power outlet, power cord, or internal power
supply. However, if the unit powers off after running for a while, check for loose
power connections, power losses or surges at the power outlet. If you still
cannot isolate the problem, the internal power supply may be defective.
ROUBLESHOOTING
S I
WITCH NDICATORS
O
IS FF
LED O
IS FF WHEN A
P
ORT
C P
OOLING
D
EVICE IS
ROBLEMS
– 27 –
C
ONNECTED TO THE