Powering On - SMC Networks SMCFS1601 User Manual

Figure 8: Connecting to Ground Through the Power Supply
1
1
The figure illustrates the application and principle. The power
N :
OTE
plug in the package and the socket in your situation will comply with
regulations in your country, so they may differ from the figure above.
If you intend to connect the switch to ground through the PE
N :
OTE
(Protective Earth) wire of the AC power cord, make sure the PE wire in
the electrical outlet is well grounded in advance.
P O
OWERING N
The SMCGS1601 and SMCGS2401 switches are powered by connecting to an AC
power supply using a power cord. When powering on the switch, it automatically
initializes and the LED indicators respond as follows:
All of the LED indicators flash momentarily for one second, which represents
1.
a resetting of the system.
The Power LED indicator turns on green.
2.
2
Switch (Rear Panel)
C
HAPTER
2
AC Power Cord (with PE cable)
– 25 –
| Installing the Switch
3
Installation