Around The Toner Cartridge - Ricoh SP 3300 Series User Manual

4 Pull the paper straight up and out.
5 Insert the trays back into the printer. Printing automatically
resumes.
In the manual tray
1 Remove the jammed paper from the printer.
2 Open and close the front cover.
3 Load a paper into the manual feeder, then the printer resumes.

Around the toner cartridge

Note
The fuser area is hot. Take care when removing paper from the
printer.
1 Open the front cover and pull the toner cartridge out.
Notes
• To prevent damage to the toner cartridge, do not expose it to
light for more than a few minutes. Cover it with a piece of
paper, if necessary.
• Do not touch the green surface underside of the toner
cartridge. Use the handle on the cartridge to avoid touching
this area.
2 Remove the jammed paper by gently pulling it straight out.
3 Replace the toner cartridge and close the front cover. Printing
automatically resumes.
9.2
<Troubleshooting>