Auto Pc Adjustment - Eiki LC-WB200 Owner's Manual

Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal
and Vertical to conform to your computer.
Menu Operation
Auto PC adj.
1
Press the MENU button to display the
On-Screen Menu. Use the Point ▲▼
buttons to select PC adjust and then press
the Point ► button or the SELECT button.
2
Use the Point ▲▼ buttons to select Auto
PC adj . and then press the SELECT button.
To store adjustment parameters
The adjusted parameters from the Auto PC
Adjustment can be stored in the projector.
Once the parameters are stored, the setting
can be done just by selecting a Mode (1–10) in
the PC System Menu (p.28). See also "Store"
on page 31.
Note:
• Fine sync, Total dots, Horizontal and Vertical of
some computers cannot be fully adjusted with the
Auto PC Adjustment function. When the image is
not provided properly with this operation, manual
adjustments are required (pp. 30-31).
• The Auto PC Adjustment cannot be operated when
480i, 575i, 480p, 575p, 720p, 1035i or 1080i is
selected in the PC System Menu (p. 28), or when
the signal is coming from the HDMI terminal.
Auto PC Adjustment
PC adjust Menu
Computer Input
Use Point ▲▼ buttons to select Auto
PC adj . and press the SELECT button.
Please wait . . . appears while the Auto
PC adjustment is in process.
29