Eiki LC-WB200 Owner's Manual page 26

Basic Operation
NO SHOW button
Press the NO SHOW button on the remote
control to black out the image. To restore to
normal, press the NO SHOW button again or
press any button. When the projected image
is captured and is set as User in the Logo
selection (p. 46), the screen changes each time
you press the NO SHOW button as follows.
black out→ the captured image → normal
→ . . . . . .
Note:
When use the MUTE button to release the
No show function, the mute function can not
be operated at the same time.
P-TIMER button
Press the P-TIMER button on the remote
control to operate the Count up/Count down
function. Refer to p.52 for detail of Setting for
the P-timer function.
To stop the count time, press the P-TIMER
button.
To cancel the P-timer function, press and hold
the P-TIMER button.
IMAGE button
Press the IMAGE button on the remote control
to select a desired image mode of the screen.
See pages 32, 40 for details.
SCREEN button
Select the screen size (See pages 34-35,
42-43 for details).
PIP button
Turn on or turn off the Picture in Picture function.
26
Remote control
Note:
See the previous page for the description of other
buttons.
No show
No show disappears after 4 seconds.
P-Timer
SCREEN button
P-TIMER button
NO SHOW button
PIP button
IMAGE button