Computer Input; Input Source Selection (Rgb: Computer 1/Computer 2) - Eiki LC-WB200 Owner's Manual

Input Source Selection (RGB: Computer 1/Computer 2)
Direct Operation
Choose either Computer 1 (RGB) or Computer 2 (RGB) by pressing the COMPUTER 1 or
COMPUTER 2 button on the remote control. Or you can press the INPUT button on the top control to
choose the desired input source.
Before using these buttons, correct input source should be selected through Menu operation as
described below.
Remote control
Menu Operation
1
Press the MENU button to display the
On-Screen Menu. Use the Point ▲▼
buttons to select Input and then press the
Point ► button or the SELECT button.
2
Use the Point ▲▼ buttons to select
Computer 1.
OR
Use the Point ▲▼ buttons to select
Computer 2 and then press the SELECT
button.
3
When Computer 1 is selected, press the
Point ► button to access the submenu
items. Use the Point ▲▼ buttons to select
the RGB input source and then press the
SELECT button.
Note:
When the Input search function is set to On 1 or
On 2 in the Auto setup function, the input signal
will be searched automatically (p.45).
Computer Input
COMPUTER 1 button
Computer 1(RGB)
Computer 1(Scart)
COMPUTER 2 button
Computer 2 (RGB)
Top Control
Input Menu
Computer 1
INPUT button
27