Top Control - Eiki LC-WB200 Owner's Manual

Part Names and Functions
① SELECT button
– Execute the selected item (p.21).
– Expand or compress the image in the
Digital zoom mode (p.35).
② POINT▲▼◄► (VOLUME – /+) buttons
– Select an item or adjust the value in the
On-Screen Menu (p.21).
– Pan the image in the Digital zoom +/- mode
(p.35).
– Adjust the volume level (Point ◄► buttons)
(p.24).
③ INPUT button
Select an input source (pp.27, 36-37).
④ ON/STAND-BY button
Turn the projector on or off (pp.18-20).
⑤ POWER indicator
– Lights red when the projector is in
stand-by mode.
– Lights green during operations.
– Blinks green in the Power management
mode (p.51).
10
Top Control
⑨
⑧
⑦
⑥
⑤
④
③
②
①
⑥ MENU button
Open or close the On-Screen Menu (p.21).
⑦ AUTO SETUP button
Execute the setting of Auto setup (includes
Input search, Auto PC adj. and Auto Keystone
functions) in the setting menu. (pp.23, 45).
⑧ WARNING indicator
– Lights red when the projector detects an
abnormal condition.
– Blinks red when the internal temperature of
the projector exceeds the operating range
(pp.60, 70).
⑨ LAMP REPLACE indicator
Lights yellow when the projection lamp
reaches its end of life (pp.63, 70).